Model IBL
Single-stage end suction pump
Features and Benefits- Back pull-out structure enables disassebly and inspection without removal of suction and discharge piping.
- High efficiency across a wide range of capacity.
- Can be used for suction pressure up to 7kgf/cm2.
- Quiet operation.
- Conforms JIMS and ISO2868 (excluding some models)
Specifications
| Standard | Optional | |
|---|---|---|
| Liquid | Clear water 0 to 80°C | |
| Max. suction pressure | 0.4MPa (4kgf/cm2) | 0.41 to 0.7MPa (4.1 to 7.1kgf/cm2) |
| Max. working pressure | 1.37MPa (14kgf/cm2) | |
| Flange | JIS 10K normal type FF | |
| Location | Indoor | |
| Other | Special common base | |
| Construction | ||
| Impeller | Enclosed | Self flushing (negative suction) |
| Shaft steal | Glank packing | External flushing (81 to 110°C) |
| Bearing | Sealed ball bearing (Oil-bath) | Casing with drain valve |
| Materials | ||
| Casing | FC250 |
Impeller: CAC406 (FC200 model) or SCS13 (FC400 model) Shaft: SUS420J1 or SUS304 Shaft sleeve: SUS304 |
| Impeller | FC200 or FC400 | |
| Shaft | S35C or SCM440 | |
| Shaft sleeve | SUS420J1 | |
| Motor | Three phase, 2 pole or 4 pole (For the available voltage, please refer to the attached “Voltage list”) TEFC Indoor type : 0.4 to 55kW ODP type : 72 to 250kW | TEFC Outdoor type |